When it comes to enclosing your 3D printer, the Snapmaker 2.0 enclosure is one of the best ways of doing that because it is airtight, a feature that helps it to ensure that the inner temperatures are well maintained. This enclosure as well has got a ventilation system, which gives you the chance to control the temperatures as you print. However, it’s always true that not all filaments will require you to use this enclosure. But using the Snapmaker enclosure together with printing in a secure area has got quite a number of benefits. Some of the benefits of using the Snapmaker enclosure are discussed below.
Benefits of using the Snapmaker 2.0 enclosure
1. Less noise is produced
Most 3D printers are known to be producing a lot of noise, something that can have a great effect on the surrounding people as it will distract their daily activities. Knowing that you are affecting those around you with the noise you’re producing will make the printing process uncomfortable. It’s advised that you use the Snapmaker 2.0 enclosure while at the same time printing in an enclosed area to help minimize the noise produced when you’re printing,
3. Production of high-quality prints
One of the greatest benefits of using the Snapmaker 2.0 enclosure is that you are able to attain the required temperatures and keep them constant by simply adjusting the nozzle. Using this enclosure does a great job of keeping the hot air intact, and you get to control it through the ventilation system. By being able to maintain the same printing temperatures, it’s easy to prevent warping. With consistent printing temperatures, you increase the chances of producing prints of high quality.
4. Less loss of heat
Loss of heat when doing 3D printing has been a common concern among quite a number of people as they end up spending a lot of money on the extra units of electricity they have lost in the process of printing. It’s important that the temperatures are maintained at a certain level to avoid heat loss, something that’s only possible when you’re using the Snapmaker 2.0 enclosure. With this enclosure, you’re assured that the inner temperatures will be maintained and prevented from escaping, which in the long run, will save your electricity bill.
5. The fumes produced are few
There are certain filaments that are known to produce very toxic gases when heated, which is the case when you’re printing using ABS filaments. For such cases, it’s important that you contain the fumes, which can be done with the use of the Snapmaker 2.0 enclosure. The ventilation system of this enclosure makes it possible for you to release these gases to the designated area, reducing the fumes in the printing area.
6. Reduced accumulation of dust particles
Leaving the 3D printer in an open area is dangerous because it can accumulate dust particles from the environment, which can clog the nozzle. When dust gets clogged in the nozzle, it can even damage it. Also, dust can accumulate on the printing bed, and when not removed, it’ll tamper with the quality of the prints. Using the Snapmaker 2.0 enclosure prevents the accumulation of dust particles.
Furthermore, it can evidently be seen that the Snapmaker enclosure plays an important role when you are using the 3D printer by ensuring that the quality of the prints is not compromised. It’s, therefore, advisable that you use the Snapmaker enclosure throughout the printing process. Visiting our website is a great thing because you’ll be able to see our best selection of these enclosures.
