acrylic dip powder processing method

If you accidentally get the nail piece crooked, soak it in water for a while to remove it, then dry the nail and reapply the sticker. Make sure the glue doesn’t run down on your skin. By https://galglitter.com/ to share more details.

1. Prepare the acrylic dip powder material. Pour the nail glue into a tray and pour the nail powder into a separate tray. Nail glue is a strong chemical, and its smell is harmful, so make sure you operate in a well-ventilated area.

2. Dip the nail polish brush into the nail glue. Dip the brush in the tray so that the bottom is dipped in nail glue, and wipe off the excess at the edge of the bowl. Then roll the brush in the dish containing the powder so that it can form a small, wet ball at the bottom.

You may have to try a few more times to know the correct ratio for turning the liquid into powder. The little balls of this mixture need to be moist and spreadable but not too wet.

Keep some paper towels handy in case you need to use them to wipe away excess. Also galglitter Wholesale’s nail polish powder is perfect for this scenario

3. Apply the mixture to the nail. Start with the “smile line.” Press the nail polish ball flat and brush from the base of the nail to the tip. Brush smoothly and quickly so that the nail and the sticker

meet naturally. Do this for all ten fingers.

Remember to wipe the brush on a paper towel after each application. But once you get the hang of it, you don’t have to wipe it often. This way, the nail polish will not stick to the brush. If it sticks to the brush, then you have to soak the brush in water before it becomes dry and wipe it off.

To avoid clumping, make sure you brush in the same direction every time.

Less is more! If you have too much polish on your nails, you’ll have to polish them for half a day. It’s best to get a little less at first.

If you get it right, then the joints will appear as a soft curve rather than a hard line. To achieve the effect, you may need more than one of these nail polish balls per nail.

Don’t apply nail polish on top of the cuticle. It should start a few centimeters above the finger skin so that the film glue will stick to your nails and not your skin.

4. Dry your nails. This process only takes ten minutes. Use the handle of your nail polish brush to tap the surface of your nail to see if the polish is dry, and if it makes a banging sound, then you can start the next step.

5. Shape the tips of your nails. Now that the nail is shaped, you can trim it with nail clippers and a file to adjust it to the shape and length you want. Then polish the surface of the nail with a tool. Remember to use a small brush to brush off any nail dust from filing so they don’t get mixed with the nail polish!

6. Apply nail polish. You can apply nail polish or colored nail polish to polish. Polish all your nails to give them a smooth surface.

7. Maintain your manicure. After two weeks, your new nails grow out, and you either have to redo them, or you can remove the original ones.

If your nails are green or yellow or don’t look too healthy, then don’t put nail polish on your nails. Gray nails and other nail problems don’t go away on their own and require treatment! If you put nail polish on your nails, the situation will get worse. Gray nails are highly contagious, so don’t share tools with others without sterilizing them.